Accursed Diode Marking
Am I a broken record? Pretty much - especially when it comes to confusing diode marketing.
For example, everyone knows what the diode symbol looks like, and pretty much everyone knows which side is the anode and which is the cathode. Right? It's just like in the following picture:
Is that big enough?
Normally, the clearest way to indicate polarity on an LED is to put something like this diode symbol in silk screen next to, or between, the copper pads. In theory, that should remove ambiguity.
We recently ran across a case of built-in ambiguity. The PC board had, what looked like, a very clear marking. The image on the right is from the assembly drawing, which is just a blow-up of the board silk screen and documentation layer.
With that marking, I'd quickly come to the conclusion that the anode is on the right and the cathode is on the left. I'd even confidently state that it's a sure thing and extremely unlikely to cause any problems. But...
Here's where I'd be very wrong, and why it's so important to always check the datasheet when dealing with diodes. Take a look at the following clip from the component's datasheet. Scroll down to the bottom of the image for the punch line.
Wow. I can't even...
The board designer was just following the datasheet. That's a perfectly proper thing to do, except when the manufacturer flips a coin like appears to have happened here. In this case, dispense with the symbol altogether and use "A", for anode and/or "K" for cathode in the silk screen. (Use "K" because "C" looks too much like a reference designator for a capacitor.)
In the land of the insane, only the sane are crazy