Screaming Circuits: PART 2, SCREAMING CIRCUITS AND THE MAKER COMMUNITY

PROTOTYPE AND SMALL VOLUME
PCB ASSEMBLY MADE EASY

PART 2, SCREAMING CIRCUITS AND THE MAKER COMMUNITY

My last post mused on the affordability of assembly at Screaming Circuits for the maker/very small business/kickstarter community. My hypothetical Arduino-compatible dual motor driver Kickstarter came out to $9.81 per board at a quantity of 250. That's probably more than a cheap off-shore assembler, but we'll get you 100% yield. They probably won't.

TI TPS62601 front and backIt's more than just cost though. Many of the budget manufacturers won't do the most complex parts. For example, I could shave about a square inch off of the board size - maybe two - by using 0402 or 0201 passive parts. That's about $.50 - $.75 less per board for the blank PC board. Most discount assembly shops won't assemble 0201 parts. Many won't assemble 0402 parts. Screaming Circuits will assemble 0201s, and your little micro BGAs too!

The part on the right is a tiny wafer scale BGA next to the edge of a U.S. dime. We can build that.

If you're just designing the board and not hand assembling, putting in 0402 or 0201 parts is no big deal. You just design it and let the robots build it. If your assembly house can't deal with those small parts, you're stuck. You've lost some freedom of choice.

Now, you would expect me to be biased, because I work here, but more than bias, it's a matter of picking the right tool for the job.

If time is your key driver and cost isn't an issue, you'd want quick-turn Full-Proto; our Short-Run production would be the wrong tool.

If cost is your key driver, you have more time, you need predictability, and need good yields, our 24 hour Full-Proto service might be overkill, but our 20 day Short-Run can do all of the hard work for you, and you'd know exactly what you're getting, and when: 250 working boards in 20 days, for a decent price.

Here's a Kickstarter project we built earlier this year.

Duane Benson
Don't use a Marten64 0-dot-19 Freembulator when you really need a Model B Mitchel Warbler brand size 32.125 green Sackcombobulator.

 

Comments

Post a comment

If you have a TypeKey or TypePad account, please Sign In.

« Part 1, Screaming Circuits and the Maker community | Main | Does Anybody Really Care? »