More Thermal Examples

Speaking of thermal relief... Here's an interesting example I ran across the other day.

Thermal relief can be a pain. If you've got a high current device, you may want more than just the thin little connections, one per side, that you get with thermals. You might feel the need for greater current capacity or you may need all the copper to distribute heat. You might have one pad, like in this image, that lands on a plane but not the other one.

In this particular board, the designer just made a few parallel traces coming out of the pad rather than one thick one.

Multi-via passive

The other side of this passive part sits right on the ground plane and has the standard thermals so the other reason this might have been done is to keep the amount of copper trace coming into the pad to be equal to that on the other side. It doesn't have exactly the same amount of copper going into both pads, but it's much close than if just one thin trace had been connected on the left pad.

Duane Benson
One thin trace rides away

TrackBack

TrackBack URL for this entry:
http://www.typepad.com/services/trackback/6a00d8341c008a53ef017744706c88970d

Listed below are links to weblogs that reference More Thermal Examples:

Comments

Post a comment

If you have a TypeKey or TypePad account, please Sign In.

« Passively annoying | Main | Via in Pad x 8 »